To submit an article online, and to check the status of your submission, you need to have an account with Spectra
Don't have an account? Register Here.Start Submission
Submissions may be sent to journalSPECTRA@gmail.com or submitted electronically through this website. Once submitted, the author can track the submission and communicate with the editors via email or through the online journal management system.
Please ensure that you consider the following guidelines when preparing your manuscript. Failure to do so may delay the processing of your submission.
Once a submission has been completed, the submitting author is able to fully track the status of the paper and complete requested revisions via their online profile.
All word limits include referencing and citation.
To ensure blind peer review, please only list the title and abstract on the submitted manuscript file.
The names of all authors, affiliations, contact details, biography (optional) and the corresponding author details must be listed on the email or completed online as part of the submission process.
Author names should include a forename and a surname. Forenames cannot include only initials.
The affiliation should ideally include Department, Institution, City, Country, however only the Institution and Country are mandatory.
Research articles must have the main text prefaced by an abstract of no more than 250 words summarising the main arguments and conclusions of the article. This must have the heading Abstract and be easily identified from the start of the main text.
A list of up to six key words may be placed below the abstract (optional).
The Abstract and Keywords should also be added to the metadata when making the initial online submission.
The body of the submission should be structured in a logical and easy to follow manner. A clear introduction section should be given that allows non-specialists in the subject an understanding of the publication and a background of the issue(s) involved. Methods, results, discussion and conclusion sections may then follow to clearly detail the information and research being presented.
Up to three level headings may be present and must be clearly identifiable using different font sizes, bold or italics. We suggest using Headings 1, 2 and 3 in MS-Words Style section.
Supplementary Files (optional)
Any supplementary/additional files that should link to the main publication must be listed, with a corresponding number, title and option description. Ideally the supplementary files are also cited in the main text.
e.g. Supplementary file 1: Appendix. Scientific data related to the experiments.
Note: additional files will not be typeset so must be provided in their final form. They will be assigned a DOI and linked to from the publication.
Ethics and consent (if applicable)
Research involving human subjects, human material, or human data, must have been performed in accordance with the Declaration of Helsinki. Where applicable, studies must have been approved by an appropriate ethics committee and the authors should include a statement within the article text detailing this approval, including the name of the ethics committee and reference number of the approval. The identity of the research subject(s) should be anonymised whenever possible. For research involving human subjects, informed consent to participate in the study must be obtained from participants (or their legal guardian).
Experiments using animals must follow national standards of care. For further information, click here.
Any acknowledgements must be headed and in a separate paragraph, placed after the main text but before the reference list.
Funding Information (optional)
Should the research have received a funding grant then the grant provider and grant number should be detailed.
If any of the authors have any competing interests then these must be declared. A short paragraph should be placed before the references. Guidelines for competing interests can be found here. If there are no competing interests to declare then the following statement should be present: The author(s) has/have no competing interests to declare.
Authors' contributions (optional)
A sentence or a short paragraph detailing the roles that each author held to contribute to the authorship of the submission.
All references cited within the submission must be listed at the end of the main text file.
For the submission title:
Capitalise all nouns, pronouns, adjectives, verbs, adverbs and subordinate conjunctions (i.e. as, because, although). Use lowercase for all articles, coordinate conjunctions and prepositions.
Headings within the main text:
First level headings in the text should follow the same rule as the main title.
For lower-level subheadings, only capitalise first letter and proper nouns.
Headings should be under 75 characters.
Submissions must be made in English. Authors are welcome to use American or British spellings as long as they are used consistently throughout the whole of the submission.
When referring to proper nouns and normal institutional titles, the official, original spelling must be used.
American or English grammar rules may be used as long as they are used consistently and match the spelling format (see above). For instance, you may use a serial comma or not.
The font used should be commonly available and in an easily readable size. This may be changed during the typesetting process.
Underlined text should be avoided whenever possible.
Bold or italicised text to emphasise a point are permitted, although should be restricted to minimal occurrences to maximise their efficiency.
Use bullet points to denote a list without hierarchy or order of value. If the list indicates a specific sequence then a numbered list must be used.
Lists should be used sparingly to maximise their impact.
Use single quotation marks except for quotes within another speech, in which case double quotation marks are used.
Quotations that are longer than three lines in length must be in an indented paragraph separate from the main text.
The standard, non-italicised font must be used for all quotes.
It must be clear from the text and/or citation where the quote is sourced. If quoting from material that is under copyright then permission will need to be obtained from the copyright holder.
Acronyms & Abbreviations
With abbreviations, the crucial goal is to ensure that the reader particularly one who may not be fully familiar with the topic or context being addressed is able to follow along. Spell out almost all acronyms on first use, indicating the acronym in parentheses immediately thereafter. Use the acronym for all subsequent references.
A number of abbreviations are so common that they do not require the full text on the first instance. Examples of these can be found here.
Abbreviations should usually be in capital letters without full stops.
Common examples from Latin origin do not follow this rule and should be lower case and can include full stops.
Use of footnotes/endnotes
Use footnotes (we refer to these as ‘Notes’ in the online publication). There should be a separate bibliography at the end of the work.
All notes used to convey additional information about the topic should be used only where crucial clarifying information needs to be conveyed. Otherwise notes of this kind should be included in the text itself.
Please insert the footnote marker after the end punctuation.
Symbols are permitted within the main text and datasets as long as they are commonly in use or have explanatory definition on their first usage.
Hyphenation, em and en dashes
There is no set rule on the use of hyphenation between words, as long as they are consistently used.
Em dashes should be used sparingly. If they are present, they should denote emphasis, change of thought or interruption to the main sentence and can replace commas, parentheses, colons or semicolons.
En dashes can be used to replace to when indicating a range. No space should surround the dash.
For numbers zero to nine please spell the whole words. Please use figures for numbers 10 or higher.
We are happy for authors to use either words or figures to represent large whole figures (i.e. one million or 1,000,000) as long as the usage is consistent throughout the text.
If the sentence includes a series of numbers then figures must be used in each instance.
If the number appears as part of a dataset, in conjunction with a symbol or as part of a table then the figure must be used.
If a sentence starts with a number it must be spelt, or the sentence should be re-written so that it no longer starts with the number.
Do not use a comma for a decimal place.
Numbers that are less than zero must have 0 precede the decimal point.
Units of measurement
Symbols following a figure to denote a unit of measurement must be taken from the latest SI brochure. See http://www.bipm.org/utils/common/pdf/si_brochure_8_en.pdf for the full brochure.
Formulae must be proofed carefully by the author. Editors will not edit formulae. If special software has been used to create formulae, the way it is laid out is the way they will appear in the publication.
Figures, including graphs and diagrams, must be professionally and clearly presented. If a figure is not easy to understand or does not appear to be of a suitable quality, the editor may ask to re-render or omit it.
All figures must be cited within the main text, in consecutive order using Arabic numerals (e.g. Figure 1, Figure 2, etc.).
Each figure must have an accompanying descriptive main title. This should clearly and concisely summarise the content and/or use of the figure image. A short additional figure legend is optional to offer a further description.
Figure titles and legends should be placed within the text document, either after the paragraph of their first citation, or as a list after the references.
The source of the image should be included, along with any relevant copyright information and a statement of authorisation (if needed).
If your figure file includes text then please present the font as Ariel, Helvetica, or Verdana. This will mean that it matches the typeset text.
NOTE: All figures must be uploaded separately as supplementary files during the submission process, if possible in colour and at a resolution of at least 300dpi. Each file should not be more than 20MB. Standard formats accepted are: JPG, TIFF, GIF, PNG, EPS. For line drawings, please provide the original vector file (e.g. .ai, or .eps).
Tables must be created using a word processor's table function, not tabbed text.
Tables should be included in the manuscript. The final layout will place the tables as close to their first citation as possible.
All tables must be cited within the main text, numbered with Arabic numerals in consecutive order (e.g. Table 1, Table 2, etc.).
Each table must have an accompanying descriptive title. This should clearly and concisely summarise the content and/or use of the table. A short additional table legend is optional to offer a further description of the table. The table title and legend should be placed underneath the table.
Tables should not include:
NOTE: If there are more columns than can fit on a single page, then the table will be placed horizontally on the page. If it still can't fit horizontally on a page, the table will be broken into two.
Every use of information from other sources must be cited in the text so that it is clear that external material has been used. This should be done in footnotes.
Even if the author is already mentioned in the footnote then author(s) name(s) should precede or follow the information gleaned from their source. The cited information should be included either as a direct quote, a paraphrased quote, or a summary. A direct quote should never be free standing in its own sentence as below.
 Stefan Dudink, Karen Hagemann and John Tosh, eds., Masculinities in Politics and War: Gendering Modern History. (Manchester: Manchester University Press, 2004), 109.
Instead the quote should be integrated in an effective way, as below.
 Dudink, Hagemann, and Tosh, eds., Masculinities in Politics and War, 109.
This journal uses the "Chicago notes" system – see below for examples of how to format (for more information, visit The Chicago Manual of Style Online). The below are for the Bibliography.
[Last Name], [First Name]. [Book Title]. [PubLocation]:[Publisher], [year].
Pollan, Michael. The Omnivore’s Dilemma: A Natural History of Four Meals. New York: Penguin, 2006.
[Last Name], [First Name]. “[chapter title].” In [Book Title], edited by [Editor First Name] [Editor Last Name], [Page Range]. [Publisher Location]:[Publisher], [Year].
Gould, Glenn. “Streisand as Schwarzkopf.” In The Glenn Gould Reader, edited by Tim Page, 308-311. New York: Vintage, 1984.
[Last Name], [First Name]. “[Article Title].” [Journal Title] [Vol], no. [Issue] ([Year]): [Page Range]. doi:[DOI].
Novak, William J. “The Myth of the Weak American State.” American Historical Review 113 no. 3 (2008): 14. doi:10.1086/ahr.133.3.14.
NOTE: Please include DOIs for all journal articles where possible.
[Last Name], [First Name]. Year. “Title”. Paper presented at [conference title], Location, Month, Date.
Adelman, Rachel. 2009. “ ‘Such Stuff as Dreams Are Made On’: God’s Footstool in the Aramaic Targumim and Midrashic Tradition.” Paper presented at the annual meeting for the Society of Biblical Literature, New Orleans, Louisiana, November 21–24.
[Last Name], [First Name]. Year. “Title”. PhD diss., University Name.
Choi, Mihwa. 2008. “Contesting Imaginaires in Death Rituals during the Northern Song Dynasty.” PhD diss., University of Chicago.
[Author/Organisation]. Year. “Title”. Accessed Month Date. URL
McDonald’s Corporation. 2008. “McDonald’s Happy Meal Toy Safety Facts.” Accessed July 19. http://www.mcdonalds.com/corp/about/factsheets.html.
[Last Name], First Name]. Year. “Title”. Newspaper Title, Month, Date.
Mendelsohn, Daniel. 2010. “But Enough about Me.” New Yorker, January 25.
[Last Name], First Name]. Year. “Title”. Newspaper Title, Month, Date. Accessed Month Date, Year. URL
Stolberg, Sheryl Gay, and Robert Pear. 2010. “Wary Centrists Posing Challenge in Health Care Vote.” New York Times, February 27. Accessed February 28, 2010. http://www.nytimes.com/2010/02/28/us/politics/28health.html.
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
Figures are all cited in the main text and are uploaded as supplementary files. Figures/images have a resolution of at least 150dpi (300dpi or above preferred). The files are in one of the following formats: JPG, TIFF, GIF, PNG, EPS (to maximise quality, the original source file is preferred).